Match legacy specifications without guessing. Compare material families, documented retention and operating requirements.
Exact-grade availability must be confirmed before ordering.
Request a configuration review
A 30 micron pleated filter cartridge is a coarse-rating request requiring INCE configuration confirmation. The main category includes 30 µm, while the detailed PP and glass fiber standard lists do not establish that exact rating. This page supports selection and quotation rather than claiming an in-stock 30 µm SKU.
For a legacy replacement, provide the original manufacturer’s retention data and cartridge drawing. A 30 µm depth cartridge, woven element and pleated cartridge can have different loading and retention behavior even when their labels match.
For an upstream coarse stage, determine whether a listed 20 µm or 40 µm candidate satisfies the equipment-protection requirement. If a 30 µm target is mandatory, request an exact grade proposal and qualification sample rather than silently substituting another rating.
This is a cross-material selection guide. The linked family pages are the catalog references, not substitutes for a confirmed grade-specific data sheet. Listed family information does not establish that every combination of dimensions, seals and rating is available.
| Material / request | Catalog status | Selection question |
|---|---|---|
| Exact 30 µm construction | Configuration confirmation required | Request a written media and retention proposal; no standard SKU, stock level or lead time is asserted here. |
30 µm is the finer numerical target, but only the selected product’s evidence establishes actual separation. The glass fiber page lists 40 µm; availability of an exact 30 µm pleated construction must be confirmed independently.
Nearby selection guides: 25 µm · 40 µm. Compare equivalent efficiency definitions and cartridge dimensions before changing grade.
| Required rating | 30 µm; state nominal/absolute definition and required retention efficiency. |
|---|---|
| Availability | Exact rating requires written configuration confirmation. |
| Dimensions and interface | Confirm actual length, OD, ID, end-cap drawing and gasket arrangement against the existing housing. |
| Fluid and hydraulics | Provide fluid composition, concentration, viscosity at temperature, flow and allowable clean differential pressure. |
| Operating limits | Obtain configuration-specific temperature, pressure and change-out limits. Limits cannot be inferred from the micron number. |
| Documents | Request a grade-specific data sheet, retention method and any product-contact or validation records required for the application. |
Include the reason for the 30 µm requirement, solids distribution, fluid, flow and differential-pressure limits. Ask how the proposed grade will be tested and whether dimensional and performance samples are available.
No grade-specific flow rate, retention percentage, service life, certification or microbial-validation result is asserted by this guide. Those values must come from documentation for the ordered configuration.
A 30 micron pleated filter cartridge is a coarse-rating request requiring INCE configuration confirmation. The main category includes 30 µm, while the detailed PP and glass fiber standard lists do not establish that exact rating. This page supports selection and quotation rather than claiming an in-stock 30 µm SKU.
30 µm is the finer numerical target, but only the selected product’s evidence establishes actual separation. The glass fiber page lists 40 µm; availability of an exact 30 µm pleated construction must be confirmed independently.
The number alone does not say. Request the retention efficiency, challenge conditions and test method for the exact grade. Do not assume a universal efficiency percentage from the word nominal or absolute.
Match the actual overall length, outside and inside diameters, end-cap interface and seal arrangement against the housing drawing. A matching micron rating or nominal length does not establish fit.
No. Particle-rating information alone does not establish sterilizing performance or removal of dissolved salts and chemicals. Microbial claims need product-specific evidence and process validation; dissolved contaminants require an appropriate treatment process.
Send the required rating and efficiency, liquid and concentration, flow, viscosity, temperature, pressure, particle load, cartridge dimensions, end-cap drawing, seals, quantity and required documentation. Ask INCE filtration to confirm the exact configuration before purchase.
Prepared by INCE filtration from the linked material-family catalog information. Reviewed: 30 October 2026. Availability statements describe the published family lists at preparation time; a written quotation and data sheet establish the supplied configuration.
PP family · Glass Fiber family
All pleated filter cartridges · Request a configuration review
WhatsApp