Industrial Filter Bags · Filter Cartridges · Filter Housings · Filter Mesh Manufacturer & Custom Supplier Replacement style · OEM size · Custom micron rating · Industrial filtration supply

How Should Buyers Specify a Silicone-Free Size 2 PP Filter Bag?

A quote-ready checklist for Size 2 polypropylene filter bags with stainless-steel rings and a silicone-free requirement—without assuming the material name proves cleanliness.

75 Micron Liquid Filter Bags for Process Filtration

Short answer: specify the complete finished bag—not only “PP, Size 2.” State the micron rating and rating basis, finished dimensions, stainless-steel ring profile and alloy, seam construction, surface treatment, process liquid, temperature, quantity, and the exact evidence required for a silicone-free claim. Polypropylene by itself does not prove that the sewing thread, ring processing, handling, or packaging is silicone-free.

polypropylene liquid filter bags used for industrial process filtration
Site-owned product visual showing representative liquid filter bags. Confirm the final PP grade, ring and seam for the quoted item.

What should “Size 2 PP filter bag” mean in the purchase specification?

INCE’s published PP bag range covers polypropylene felt, common micron grades from 1 to 200 µm, standard sizes #01 to #04, multiple ring styles, and sewn or welded construction. Its Size #02 reference is approximately 7 × 32 inches (about 180 × 810 mm). Those values are a starting point, not an interchangeability guarantee: finished length, collar position and ring geometry must match the basket and sealing interface.

RFQ field What the buyer should state Why it affects the quote
Media Polypropylene felt; required grade or approved sample Media weight, finish and construction affect retention, flow and cleanliness.
Micron rating Numeric grade plus nominal/absolute or test basis if required A micron number alone does not establish efficiency.
Finished size Diameter × usable length, with units and measurement points “Size 2” can vary among housings and suppliers.
Top interface Stainless-steel ring alloy, profile, diameter and handle requirement Ring material alone does not confirm sealing fit.
Seam Sewn or welded; thread material and bottom shape where relevant Construction changes the finished bag and possible contamination paths.
Surface Standard, glazed or singed when applicable Surface treatment can affect fiber control and handling.
Silicone control Define prohibited substances, declaration format, lot traceability and packaging “Silicone-free” must be tied to an agreed scope and evidence.
liquid filter bag micron selection chart for procurement
Site-owned selection chart. Use it to shortlist a grade, then qualify retention and pressure drop in the actual process.

How should a buyer define “silicone-free”?

Do not accept a verbal assumption that polypropylene is automatically silicone-free. The RFQ should identify the reason for the restriction—paint defects, coating adhesion, electronics cleanliness, or another controlled process—and define which parts and operations are in scope. Ask the supplier to address the media, sewing thread, ring forming, lubricants, release agents, handling surfaces, labels and packaging for the exact construction.

Boundary condition: this article does not claim that every INCE PP bag is silicone-free. The correct commercial path is a written requirement, supplier response for the exact SKU, and sample or lot approval against the buyer’s acceptance method.

What should be approved before recurring production?

  1. Approve a drawing or controlled specification with finished dimensions and ring profile.
  2. Agree the retention description and any test document required for the media.
  3. Confirm wetted material compatibility using the complete liquid composition and temperature.
  4. Run a sample or first-article trial in the intended housing and record sealing fit, pressure-drop behavior and downstream quality.
  5. Freeze the approved label, inner bag, carton quantity and any lot-identification requirement.
polypropylene filter bag material selection decision guide
Site-owned decision guide. PP can be a practical starting material, but chemistry, temperature and cleanliness still require project review.

Which INCE page should procurement use?

Review the verified construction options on the polypropylene filter bag product page. For dimensions, ring drawings, sample quantities, private-label packaging and a written silicone-control scope, use the filter bag inquiry form.

Frequently asked questions

Is a Size 2 bag always exactly 180 × 810 mm?

No. That is a common reference dimension, but the supplier and housing drawing control the finished dimensions and sealing position.

Does a stainless-steel ring guarantee compatibility?

No. Confirm the alloy, wire or ring profile, finished diameter, handle arrangement and how the ring seats in the housing.

Can a supplier certify every PP bag as silicone-free?

Do not assume it. Request a written response for the exact construction and define the evidence and acceptance method in the purchase specification.


Related Articles

Continue Reading About Liquid Filtration

Need a Filter Bag Recommendation?

Send the liquid, micron target, flow, pressure, temperature, bag dimensions and quantity for review.

Start a Filter Bag Inquiry
Filtration Engineer
● Online
×
WhatsApp