Short answer: INCE-C8326 is a candidate only when the old cartridge matches the verified geometry: 19-inch overall height, 8 1/2-inch outside diameter, a 2 3/16-inch slip top hole and a 2 3/4-inch beveled bottom hole. Confirm all four dimensions, the housing model and end geometry before ordering.
Send C8326 Measurements for a Quote
The INCE pool-cartridge table cross-references INCE-C-8326 with C-8326, PSD125-2000 and FC-2780 identifiers. These names are compatibility references, not a claim that the INCE element is an original cartridge from those trademark owners. Physical verification still controls the quote.

What dimensions define the INCE-C8326 example?
| Measurement | Verified reference | Buyer action |
|---|---|---|
| Overall height | 19 in | Measure end-cap to end-cap; separately record any protrusion |
| Outside diameter | 8 1/2 in | Measure straight across the widest body point |
| Top hole | 2 3/16 in, slip | Photograph the top and measure the inside opening |
| Bottom hole | 2 3/4 in, beveled | Photograph the bevel and measure the mating opening |
These values come from the supplied INCE product sheet and are a measurement example. Used cartridges can distort after service, and a similar-looking cartridge may have a different seal. Compare the old element, housing label and the swimming pool filter cartridge product page.
What construction data should the buyer verify?
The INCE pool range lists washable PET polyester non-woven media, a PP plus glass-fiber reinforced center support, two-component PU end caps, and fluororubber or nitrile seals depending on the configuration. Available product-family ratings are 1, 5, 10, 20 and 50 µm, and customizable lengths are listed from 5 to 40 inches. Do not assume every cross-reference model is offered in every rating without written confirmation.

Why the model number alone is not enough
- A prior aftermarket element may carry a cross-reference that does not reflect the original housing.
- Top and bottom geometry can differ even when length and OD match.
- The filtration-area and pleat package can change hydraulic behavior.
- Seal material must suit the pool or spa water chemistry and temperature.
- A compatible replacement should be confirmed against measurements, photos and a trial where fit is uncertain.
Get OEM Pool Cartridge Pricing
What should a distributor include in the RFQ?
| RFQ field | Information to provide |
|---|---|
| Identification | Housing brand/model, old cartridge code and all cross-reference numbers |
| Dimensions | Height, OD, top-hole ID/type, bottom-hole ID/type and protrusions |
| Photos | Full cartridge, top, bottom, label and housing nameplate |
| Operating duty | Pool/spa type, flow per housing, water temperature, cleaning method and cartridge count |
| Product request | Micron target, quantity, sample need, private label, carton marking and destination |
| Acceptance | Drawing approval, fit check, sample approval and agreed inspection record |

Recommended replacement workflow
- Record the housing and cartridge codes.
- Measure the four C8326 reference dimensions.
- Photograph both ends and any seal or thread.
- Confirm media, micron target, cartridge quantity and flow.
- Approve a drawing or sample before a production order.
Frequently asked questions
Does C-8326 automatically guarantee fit?
No. It is a useful cross-reference, but dimensions and end geometry must be verified.
Can INCE supply private-label pool cartridges?
Private labeling and packaging can be discussed after the replacement geometry and product specification are approved.
What should I send for the fastest quote?
Send the old model, height, OD, top and bottom hole details, four photos, required quantity and destination.