Short answer: a seawater pretreatment high flow filter housing must be specified from water chemistry and variability, flow cases, solids or SDI data, target membrane-protection duty, cartridge interface, clean and terminal differential pressure, materials, pressure/code requirements and maintenance layout. Do not select a vessel from flow rate or “316L” alone.
Send water analysis and source, design/normal/peak flow, temperature, operating and design pressure, solids/SDI data, target micron and efficiency basis, cartridge family/length, connection and code requirements, quantity and destination.

What Question Should the Housing Supplier Answer?
The supplier should not answer only “how many cartridges?” A useful proposal explains which high flow filter housing and cartridge geometry are being offered, the verified project conditions, material basis, connection/layout, expected clean pressure-drop method and the information still requiring a trial.
| Design input | Buyer data | Supplier response expected |
|---|---|---|
| Water source | Open intake, well, beach well or other source; seasonal analysis | Compatibility questions and assumptions listed explicitly. |
| Hydraulic cases | Normal, minimum and peak flow; viscosity and temperature | Cartridge count, pipe/connection size and clean pressure-drop basis. |
| Fouling duty | Turbidity/solids, SDI if available, particle distribution and upset conditions | Micron/efficiency proposal, pretreatment boundary and trial plan. |
| Pressure | Operating, maximum, design, pump shutoff and allowed element/tubesheet ΔP | Verified vessel and internal limits for the offered configuration. |
| Corrosion basis | Chloride and full chemistry, oxygen, temperature, cleaning and stagnation | Wetted materials, allowance/coating if any, exclusions and documentation. |
| Operations | Redundancy, change-out access, lifting, drain and disposal route | GA drawing, element removal space and isolation/vent/drain details. |
Choose the Cartridge and Housing as One System
Confirm the exact cartridge family, length, outside diameter, sealing interface, flow direction and support/hold-down arrangement. A “Pall/Parker/3M compatible” phrase is not sufficient for interchangeability. Use the INCE high flow cartridge range to identify the replacement family, then approve the vessel internals and cartridge sample together.

Material and Corrosion Review
Seawater and brackish sources vary. State chloride and other ions, temperature, dissolved oxygen, biocide or oxidant exposure, cleaning agents, stagnation periods and expected service life. The material review must cover the shell, tubesheet, hold-down parts, fasteners, gasket or O-rings, vents, drains and instruments. If coating, lining, corrosion allowance or a non-metallic option is required, put it in the data sheet and request inspection evidence.
Before Price Comparison
- Issue the same design basis and cartridge duty to every bidder.
- Separate normal operating pressure from design pressure and element differential pressure.
- Require an outline drawing with nozzle orientation and cartridge-removal clearance.
- Define the code, test, material and documentation requirements.
- Ask for consumable cartridge pricing and the basis for recommended quantity.
- Agree on a trial or performance acceptance method for variable feedwater.
Provide water analysis/source, seasonal range, flow cases, temperature, solids/SDI, micron/efficiency goal, cartridge reference, pressures, materials, code, connections, vent/drain, layout, documents, quantity and destination.

Commercial Route
Start with the high flow housing commercial page, pair it with the high flow cartridge family, and submit the project data through the engineering RFQ form. This application page targets seawater/pre-RO procurement questions and does not replace either commercial product page.
Send water analysis, seasonal range, flow cases, SDI/solids, cartridge duty, pressures, materials, code, connections, layout, documents, quantity and destination.
Frequently Asked Questions
Is 316L stainless steel automatically suitable for seawater pretreatment?
No. The material decision depends on chloride level, temperature, oxygen, stagnation, cleaning chemicals, pressure, code basis, fabrication details and required life. Ask the engineer and supplier to document the selection basis.
Can a high flow housing be sized from peak flow alone?
No. Sizing also needs cartridge family and length, micron and efficiency basis, liquid viscosity, solids or SDI data, clean and terminal pressure-drop limits, redundancy, fouling variability and change-out strategy.
What should a seawater high flow housing RFQ include?
Include water analysis and source variability, flow cases, temperature, operating/design pressure, allowable differential pressure, target protection duty, cartridge reference, connection and code requirements, materials, corrosion allowance if applicable, vent/drain, layout, documents, quantity and destination.