Short answer: specify PPH or PVDF only after the supplier reviews the complete liquid composition, concentration, temperature, pressure and cleaning cycle. PPH can be the economical non-metallic option for many compatible duties; PVDF is an alternative when the chemical and temperature review requires a fluoropolymer. Neither material should be approved from pH or a generic “corrosive liquid” description alone.
Send liquid components and concentrations, normal/maximum temperature, flow, operating and design pressure, bag size, connection standard, seal requirement, quantity and destination.

Which Material Should a Buyer Put on the RFQ?
Start with service conditions, not a material name. The INCE PPH / PVDF filter housing page identifies PPH and PVDF material codes, molded housing construction, multiple bag sizes and cover or accessory options. The same page also warns that the PVDF configuration must be confirmed separately rather than copied from the PPH reference table.
| RFQ decision | What the buyer should provide | Why it changes the selection |
|---|---|---|
| Wetted material | Every chemical, concentration, contaminants and cleaning agents | Mixtures and cleaning exposure can change compatibility. |
| Temperature basis | Normal, maximum, startup and cleaning temperature | Allowable pressure and long-term material behavior are temperature-dependent. |
| Pressure basis | Operating, maximum, design and differential pressure | The complete assembly, not resin name alone, determines the allowable duty. |
| Hydraulic duty | Flow, viscosity, solids loading and allowed clean/terminal pressure drop | Reference flow is not a guaranteed process capacity. |
| Mechanical interface | Bag dimensions, inlet/outlet size and standard, orientation and support needs | Fit and serviceability must match the actual piping and element. |
| Accessories | Vent, gauge, drain, protection switch, seals and instrumentation | Accessories introduce additional wetted materials and pressure boundaries. |
Use the Published Model Data Correctly
For selected PPH reference models, INCE publishes a maximum pressure of 0.8 MPa, reference flows from 12 to 40 m³/h, and bag dimensions including 105 × 380, 150 × 510, 180 × 430, 180 × 560 and 180 × 810 mm. These figures are model-reference values, not a promise for every liquid or a PVDF configuration. A quotation should identify the exact model code and state the verified project limits.

What Must Be Confirmed Before Purchase Order?
- Approved chemical list, concentrations and cleaning recipe.
- Normal and design temperature/pressure pair, not separate maximum numbers.
- Housing body, basket, cover, seal and accessory materials.
- Bag size, top style, micron rating and support arrangement.
- Connection type, size, orientation and mating standard.
- Required GA drawing, pressure-test documentation and inspection records.
- Operating instructions, spares and replacement seal identification.
Attach the process data sheet or list chemistry, concentration, temperature, pressure, flow, viscosity, solids, micron, bag size, connections, accessories, quantity and destination. INCE can return a configuration for review rather than guessing from pH.

Where This Article Fits
This page answers the procurement question “PPH or PVDF for my corrosive liquid?” It supports, rather than replaces, the commercial PPH / PVDF filter housing product page. Buyers who already know the required material can use the product page for available model coding; uncertain projects should send service data through the engineering quote form.
Send the complete chemical list, concentrations, temperature and pressure cases, flow, bag size, connections, seals, accessories, quantity and destination.
Frequently Asked Questions
Can PPH or PVDF be selected from pH alone?
No. Material review should use the complete chemical composition, concentration, temperature, pressure, exposure time, cleaning chemicals and mechanical duty. A pH value alone can miss solvents, oxidizers and mixed-chemical effects.
Do the published PPH reference limits automatically apply to PVDF?
No. The published PPH model table is reference data for those PPH configurations. A PVDF quotation needs separate confirmation of pressure, temperature, dimensions and wetted components.
What should I send for a useful PPH or PVDF housing quotation?
Send every liquid component and concentration, normal and maximum temperature, operating and design pressure, flow, viscosity, solids, target micron rating, bag size, connection standard, seal preference, quantity and destination.