A useful INCE-MB-03 quotation starts with the published three-bag, Size #2 reference configuration, then adds the buyer’s actual liquid, flow, bag media, pressure, temperature, nozzle standard and site constraints. The listed 90 T/H value is a reference—not a guaranteed capacity. See the multi bag filter housing product page for the model family.
Replacing three parallel bags or sizing a compact multi-bag vessel? Request an INCE-MB-03 quotation. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.

What is the published INCE-MB-03 reference?
| Item | Published reference | What the buyer must confirm |
|---|---|---|
| Model | INCE-MB-03 | Confirm three-bag arrangement and whether Size #2 bags are required. |
| Body diameter | Ø450 mm | Check available floor space, service envelope and local access. |
| Connection | DN100 | Specify flange/connection standard, pressure class and mating details. |
| Flow | 90 T/H reference | Provide actual liquid properties, solids loading and allowable pressure drop. |
| Shell thickness | 3.0 mm reference | Final mechanical design and code basis must appear on the approved drawing. |
| Materials | 304 or 316L listed | Confirm wetted material and corrosion compatibility. |
| Temperature / pressure | Up to 130 °C and 1.0 MPa references | Engineering confirmation is required for the chosen seal, closure and duty. |
The published layout uses side inlet and bottom outlet with a davit/handwheel cover arrangement. Reference drawings show an approximately Ø450 mm body and Size #2 basket proportions, but manufacturing must follow the approved general-arrangement drawing rather than dimensions copied from a web page.
When does a three-bag housing make purchasing sense?
A three-bag vessel can consolidate multiple parallel housings, reduce piping complexity and provide more filtration area than a single-bag unit. It is a candidate when the required flow or solids load makes one bag impractical, yet the plant does not need a larger 4-, 5-, 6- or 12-bag vessel. The final answer depends on bag area, clean and loaded pressure drop, viscosity, solids mass, operating cycle and maintenance strategy.

RFQ checklist for an INCE-MB-03
- Fluid: name/composition, viscosity and density at operating temperature, corrosiveness, solids description and solids concentration.
- Duty: normal/maximum flow, operating/design pressure and temperature, allowable clean and terminal differential pressure, continuous or batch service.
- Bags: Size #2 confirmation, material, micron rating, nominal/absolute basis where relevant, ring style, quantity per change and expected loading.
- Vessel: 304/316L, gasket material, internal finish, vent, drain, pressure gauges or differential-pressure ports, basket requirements and closure preference.
- Piping/site: DN100 confirmation, flange standard/class, inlet/outlet orientation, floor plan, lifting clearance and maintenance access.
- Commercial: vessel quantity, spare parts/bags, drawings, documentation, packing, destination and requested schedule.
To verify whether INCE-MB-03 is the right size Send the complete RFQ data. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.
Do not purchase against the 90 T/H number alone
Water-like liquid with low solids may behave very differently from a viscous slurry or a high-solids batch. Bag media and micron rating change resistance, while piping and valves consume pressure. Ask INCE to document the selection basis and any assumptions in the quotation.

Procurement path from inquiry to approved drawing
Submit process and site data, receive the proposed model and bag basis, review the data sheet and drawing, then approve materials, connections, seal, instruments and documentation. If replacing another vessel, send its nameplate, drawings and clear connection photos; compatibility should be verified dimension by dimension.
Frequently Asked Questions
Is 90 T/H guaranteed for every INCE-MB-03?
No. It is a published reference. Capacity must be checked against fluid properties, filter bag, solids load, pressure drop and piping.
Does INCE-MB-03 use Size #2 bags?
The published three-bag drawing is based on Size #2 bags. Confirm the ring style, material, micron rating and exact fit in the quotation.
Can I order 316L and different connection standards?
304 and 316L are listed options, and project connections should be specified. Compatibility and the final nozzle schedule must be confirmed on the approved data sheet and drawing.
Have a replacement model or project datasheet Get OEM pricing and drawing review. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.