Industrial Filter Bags · Filter Cartridges · Filter Housings · Filter Mesh Manufacturer & Custom Supplier Replacement style · OEM size · Custom micron rating · Industrial filtration supply

How to Specify 75 Micron Nylon Filter Mesh Rolls

Specify 75 micron nylon mesh with aperture, 80 mesh/cm, 203 mesh/inch, 50 micron thread, width, PA grade and OEM RFQ details.

nylon monofilament filter mesh for industrial filtration

Do not purchase a “75 micron nylon mesh” from aperture alone. For the INCE JPP75-203 reference, specify the 75 µm opening together with 80 mesh/cm (203 mesh/inch), 50 µm thread diameter, 127 cm roll width, nylon grade, roll length, quantity and the final fabricated form. Review the nylon filter mesh product page before sending the RFQ.

Need a roll, slit width or fabricated mesh part? Request 75 micron nylon mesh pricing. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.

Nylon monofilament filter mesh for 75 micron specification
Site-owned product image: representative nylon monofilament mesh; verify the JPP75-203 construction on the quotation.

What is the JPP75-203 published construction?

SpecificationPublished valueWhy procurement needs it
Nominal opening reference75 µmDefines the stated clear opening; do not treat it as an automatic absolute particle-retention guarantee.
Mesh count80 mesh/cmControls repeatability with thread diameter and opening.
Mesh count, imperial203 mesh/inchUseful for US drawings and supplier comparison.
Thread diameter50 µmAffects open area, strength and fabric handling.
Reference roll width127 cmConfirm usable width, edge condition and slitting tolerance.
MaterialNylon mesh; PA6/PA66 options listed by the product familyConfirm polymer grade against temperature, chemicals, hydrolysis and cleaning method.

Micron, mesh count and thread diameter must describe the same woven construction. A quote that lists only “75 micron” leaves room for a different thread, open area, strength or roll geometry. Ask for the exact product code or a matched construction in the supplier’s confirmation.

Is 75 µm the same as absolute particle retention?

No. Woven mesh is normally specified by its geometric opening, while process retention also depends on particle shape, orientation, deformability, agglomeration, pressure, flow and whether the buyer requires surface screening or a defined efficiency test. If the downstream limit is critical, state the required test method and acceptance criterion instead of assuming the aperture is an absolute rating.

Custom fabricated nylon filter mesh parts
Site-owned product image: INCE can review conversion from roll mesh to cut, sewn or fabricated components; final tolerances need a drawing.

RFQ data for rolls and OEM fabricated parts

  • Construction: JPP75-203 or required opening, mesh count, thread diameter and nylon grade.
  • Roll supply: full or slit width, roll length, number of rolls, edge condition, winding/core and packaging.
  • Fabrication: finished dimensions, seam or weld, ring/frame, reinforcement, tolerance and drawing/sample.
  • Process: liquid or air, temperature, chemistry/pH, cleaning agent, differential pressure, particle description and food-contact or other compliance documents if genuinely required.
  • Quality: inspection method, sampling plan, certificate/data-sheet requirements and traceability.
  • Commercial: quantity per size, forecast, destination country, target delivery window and sample requirement.

For an apples-to-apples quotation Send your mesh code or drawing. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.

PA6 or PA66: do not choose by name only

Both grades may be available within a nylon mesh range, but the correct polymer depends on temperature, water exposure, chemical contact, cleaning and mechanical duty. Provide the real service conditions and ask INCE to confirm the material. If nylon is unsuitable, request an alternative material review rather than forcing a 75 µm nylon specification.

Fabricated nylon mesh liquid filter bag example
Site-owned application photo: a fabricated nylon mesh bag example. It is not evidence that this photographed bag is JPP75-203; specify the required construction separately.

How to compare supplier quotations

Line up aperture, metric and imperial mesh count, thread diameter, polymer, width, length, tolerance, edge, packaging and inspection. A lower price is not comparable when any of those fields differ. For OEM parts, compare the drawing revision, seam method and finished dimensions as well.

Frequently Asked Questions

What does JPP75-203 mean for purchasing?

It identifies the published 75 µm nylon mesh construction associated with 80 mesh/cm, 203 mesh/inch, 50 µm thread and 127 cm reference width. Confirm all fields in the quotation.

Can 75 µm mesh guarantee removal of every particle larger than 75 µm?

No. Particle shape, deformability and test conditions matter. Specify a verified efficiency or acceptance test if the process requires one.

Can INCE supply slit rolls or fabricated parts?

The site presents nylon mesh and custom fabrication capability. Send finished width, length, drawing, seam/frame details, tolerance and quantity for confirmation.

Ready to specify JPP75-203 Request a mesh sample or OEM quote. Include the operating liquid, micron or opening target, flow, temperature, pressure, connection, quantity, destination country, and any drawing or incumbent model available.

Related Articles

Continue Reading About Liquid Filtration

Need a Filter Bag Recommendation?

Send the liquid, micron target, flow, pressure, temperature, bag dimensions and quantity for review.

Start a Filter Bag Inquiry
Filtration Engineer
● Online
×
WhatsApp