Industrial Filter Bags · Filter Cartridges · Filter Housings · Filter Mesh Manufacturer & Custom Supplier Replacement style · OEM size · Custom micron rating · Industrial filtration supply

250 Micron Nylon Filter Mesh: Should Buyers Specify 237 or 267 µm?

How buyers should convert a nominal 250 micron nylon filter mesh request into a clear RFQ using INCE’s nearby 237 µm and 267 µm published constructions.

nylon monofilament filter mesh for industrial filtration

Direct answer: If a buyer requests “250 micron nylon filter mesh,” do not assume there is one universal construction. INCE’s published mesh chart lists two nearby standard options: JPP237-71 with a 237 µm opening and JPP267-61 with a 267 µm opening. The correct choice depends on the permitted opening tolerance, the particle-retention objective and how the mesh will be fabricated. Review the nylon filter mesh product page before issuing a purchase order.

Need a 250 Micron Nylon Mesh Quotation?

Send the required opening or acceptable range, PA grade, roll width and length, quantity, end use, edge or cut-part requirement, and delivery country. If 250 µm is only a nominal target, state what particles must be retained and what may pass.

Send Your Specification

Nylon monofilament filter mesh for industrial filtration
INCE nylon filter mesh product image. Final opening, thread diameter and roll format must be confirmed on the quotation.

Should I Buy 237 µm or 267 µm Nylon Mesh for a 250 µm Request?

Use 237 µm when the permitted opening should stay below the nominal 250 µm target; use 267 µm only when a slightly larger standard opening is acceptable. This is a procurement decision, not a claim that either construction provides absolute particle retention. Particle shape, deformation, orientation, pressure and the definition of nominal versus absolute rating can affect the result.

INCE chart code Published opening Mesh count Published thread diameter Published width
JPP237-71 237 µm 28 mesh/cm; 71 mesh/in 120 µm 127 cm
JPP267-61 267 µm 24 mesh/cm; 61 mesh/in 150 µm 127 cm
Custom fabricated filter mesh parts for industrial filtration
A 250 µm request may be supplied as roll goods or converted parts. Confirm the final geometry before quotation.

Why “250 Micron” Alone Is Not a Complete Purchase Specification

  • State whether 250 µm is a nominal target, a maximum allowed opening or simply a screening reference.
  • Define the acceptable opening range and the measurement or sampling plan required by your quality team.
  • Identify the required polyamide grade and any chemical or temperature conditions that require review.
  • Include mesh count and thread diameter when they are controlled; these influence open area and mechanical behavior.
  • Specify roll width and length, cut sheet, disc, tube, bag or another converted shape.
  • Define edge treatment, seams, ring or drawstring details, cleanliness and packaging.
  • Give trial quantity, forecast quantity, destination, labeling and documentation needed for receiving inspection.

What Process Information Helps INCE Confirm the Mesh?

Describe the liquid or air stream, operating and cleaning temperatures, differential pressure or mechanical loading, retained-particle target, upstream contaminants and whether the mesh is disposable or cleaned and reused. For chemical service, provide the chemical name and concentration rather than relying on the word “water” or “solvent.”

Nylon mesh filter bag application example
Application example only: a converted nylon mesh bag is not proof of the exact 237 µm or 267 µm construction. Confirm the mesh code and finished dimensions.

RFQ Checklist for a Comparable Supplier Quote

RFQ field What the buyer should provide Why it matters
Opening 237 µm, 267 µm, or an approved tolerance around 250 µm Prevents an ambiguous “250 micron” order
Material PA grade plus chemical and temperature conditions Supports material compatibility review
Construction Mesh count and thread diameter if controlled Distinguishes constructions with similar openings
Format Width × roll length, or finished-part drawing Defines manufacturing and packing scope
Quantity Trial and annual quantity Supports an appropriate quotation and sample plan
Inspection Opening tolerance, sample size and report needs Aligns incoming inspection with the PO

Convert a Nominal Micron Request into a Purchasable Specification

Attach an existing sample photo, drawing or previous supplier label if available. INCE can review whether the closer published construction is 237 µm or 267 µm and quote the confirmed format without promising an unverified tolerance.

Request a Quote

Frequently Asked Questions

Is 250 micron nylon mesh the same as 60 mesh?

Not necessarily. Mesh count depends on both the opening and the thread diameter. Order by a complete construction, not by converting micron to a single mesh number without the thread data.

Does a 250 micron mesh guarantee that every 250 micron particle is retained?

No. A mesh opening is a geometric specification, while real retention also depends on particle shape, orientation, deformation, operating pressure and the agreed rating definition.

What should I send for a custom nylon mesh quotation?

Send the target opening or tolerance, PA grade, mesh count and thread diameter when controlled, supply dimensions, finished shape, quantity, operating conditions, drawing or sample, and destination country.

Ready for Pricing?

Send the micron target, acceptable opening range, material, dimensions, quantity, operating conditions and destination. The quotation will state the construction actually offered.

Get OEM Pricing

Related Articles

Continue Reading About Liquid Filtration

Need a Filter Bag Recommendation?

Send the liquid, micron target, flow, pressure, temperature, bag dimensions and quantity for review.

Start a Filter Bag Inquiry
Filtration Engineer
● Online
×
WhatsApp