20 Micron
Intermediate process prefiltration
Explore 20 micron cartridges →Coarser process filtration
30 Micron Melt Blown Filter Cartridge
A 30 micron melt blown filter cartridge is a coarser PP depth-filter option between 20 and 60 micron, suitable for evaluation as a process prefilter.
Three-layer graded polypropylene media, with dimensions and connection options matched to your filtration system.
Request a 30 Micron QuoteView Specifications
30 µmStated filtration rating
PP mediaThree-layer depth filtration
10–60 inchListed series length options
Choosing a 30 Micron PP Filter Cartridge
Use a particle analysis to decide whether 30 micron provides sufficient coarse-particle control before a finer stage. Solids concentration and viscosity still determine loading.
A micron rating describes a filtration grade, not a guaranteed percentage removal. Confirm whether the selected cartridge is nominally or absolutely rated, the test method and retention efficiency at the required particle size.
Depth media captures particles through a fibrous structure rather than through a single woven aperture. Actual performance depends on media construction, liquid viscosity, flow, particle distribution and cartridge loading. This cartridge is intended for suspended particles; it is not a desalination or dissolved-contaminant treatment stage.
30 Micron Cartridge Specifications
Listed construction options are based on the INCE melt blown cartridge series specifications. Confirm availability of the complete combination before ordering.
| Item | Specification / selection requirement |
|---|---|
| Filtration rating | 30 µm; efficiency and test method to be confirmed |
| Filter media / structure | PP polypropylene; three-layer graded depth media |
| Nominal lengths | 10, 20, 30, 40, 50 and 60 inch; confirm actual sealing length |
| Diameter options | 63 / 115 mm OD; 28 / 30 mm ID; confirm the selected pairing |
| Core / end caps | PP or stainless steel center core options; PP end caps |
| Seals | Silicone, EPDM, NBR or Viton options; compatibility review required |
| Assembly | Hot-melt-welded connections without adhesive |
| Series temperature limit | Listed maximum 70°C; confirm configuration and liquid suitability |
| Series differential-pressure limit | Listed maximum 2.0 bar at 21°C; this is not a housing pressure rating |
| Change-out differential pressure | Request a confirmed limit for the ordered cartridge. Do not exceed the applicable cartridge or housing limit. |
| Flow rate | Request the 30 µm pressure-drop curve for the selected length and diameter |
Temperature and pressure limits are not a guarantee of simultaneous operation at both maxima. Sanitization or steam use requires a separately approved configuration and operating procedure; a stainless steel insert alone does not establish steam compatibility.
30 vs 60 micron: Selection Comparison
The 30 micron grade has a finer stated rating than 60 micron. Confirm that the additional particle-control requirement justifies the selected construction and pressure drop.
30 Micron
Coarser process filtration
Current rating60 Micron
Coarse suspended-solids prefiltration
Explore 60 micron cartridges →Compare like-for-like dimensions and test conditions. A finer stated rating does not provide a fixed service-life, efficiency or flow-rate ratio.
Dimensions, End Caps and Sealing
Match the housing
Provide a dimensional drawing or an existing cartridge sample. Check actual length, OD, ID, support and sealing faces rather than relying only on the nominal inch size.
Select the interface
The series lists flat, 215, 222, high 222 and 226 connections, with tip and cover options. Confirm the adapter and opposite-end arrangement as a complete assembly.
Review chemical compatibility
Specify the liquid, concentration and temperature. PP media, center core and gasket compatibility must all be checked for the proposed process.
Applications to Evaluate
Water treatment
Evaluate suspended-solids removal and staged prefiltration using feed-water analysis. RO pretreatment requires the membrane supplier’s specified particle-removal performance.
Process liquids
Consider compatible chemical and industrial liquid clarification. Select the rating against the actual downstream requirement and verify flow at process viscosity.
Documented production processes
Food, beverage and other controlled processes require application-specific material declarations and qualification. Request the documents for the exact supplied configuration.
Frequently Asked Questions
What does a 30 micron melt blown filter cartridge mean?
A 30 micron melt blown filter cartridge is a coarser PP depth-filter option between 20 and 60 micron, suitable for evaluation as a process prefilter. The stated micron rating must be paired with a retention efficiency and test method; it is not automatically an absolute rating.
30 vs 60 micron: which should I choose?
The 30 micron grade has a finer stated rating than 60 micron. Confirm that the additional particle-control requirement justifies the selected construction and pressure drop.
Which cartridge lengths and diameters are available?
The series lists 10, 20, 30, 40, 50 and 60 inch nominal lengths, 63 or 115 mm outside diameters and 28 or 30 mm inside diameters. Confirm the exact combination and dimensional drawing for the selected rating.
Can I use this PP cartridge in my existing housing?
Confirm actual length, OD, ID, end interfaces, sealing arrangement and gasket material against the housing drawing. A matching micron rating or nominal length alone does not establish compatibility.
Is this cartridge suitable for RO, food or pharmaceutical filtration?
Suitability depends on liquid compatibility, required retention, operating conditions and application-specific documentation. Ask for relevant material declarations and validation; the cartridge is not presented as a sterilizing-grade filter.
When should the cartridge be replaced?
Use an approved change-out differential pressure below the applicable cartridge and housing limits, or replace earlier if process quality or flow requires it. Obtain a confirmed threshold for the ordered configuration.
What information is needed for a quotation?
Send the micron rating, dimensions, end-cap drawing or sample, core and gasket requirements, liquid, flow rate, temperature, operating pressure, solids loading, quantity and required documentation.
Explore Melt Blown Cartridge Micron Ratings
Request Your 30 Micron Cartridge Configuration
Send your required quantity, cartridge dimensions, end-cap details, liquid, flow rate, temperature and operating pressure. Include retention requirements and any material documentation needed for your process.
Contact INCE for a Quote
WhatsApp