213 µm
JPP213-76213 µm · Heavier Thread
Nearest listed opening to 200 µm, using the thicker of the two 213 µm standard threads.
30 mesh/cm76 mesh/inch120 µm thread127 cm width
Nominal 200 Micron Nylon Mesh
200 Micron Nylon Filter Mesh 213 µm Standard Options
“200 micron nylon filter mesh” is a common sourcing term, but the current INCE filtration reference table does not list an exact 200 µm woven opening. The nearest listed opening is 213 µm, available in two standard constructions: JPP213-76 and JPP213-81. A 178 µm JPP178-91 construction is available when a finer opening is required.
Nearest listed opening: 213 µmJPP213-76 · JPP213-81 · two thread constructions
Quick answer: for a nominal 200 µm requirement, the nearest listed INCE filtration opening is 213 µm. Choose between JPP213-76 with 120 µm thread and JPP213-81 with 100 µm thread. If a smaller aperture is required, review 178 µm JPP178-91. Do not order by “200 micron” alone when the exact woven construction matters.
Nearest Standard Constructions
Which Nylon Mesh Should You Use for a 200 Micron Target?
The two 213 µm constructions share the same clear opening but use different mesh counts and thread diameters. Select the parent mesh by opening, thread geometry, mechanical requirement and process conditions.
213 µm
JPP213-81213 µm · Finer Thread
Same clear opening with a higher mesh count and 100 µm monofilament thread.
32 mesh/cm81 mesh/inch100 µm thread127 cm width
178 µm
JPP178-91Finer Nearby Option
22 µm below the nominal target and useful when a smaller standard aperture is preferred.
36 mesh/cm91 mesh/inch100 µm thread127 cm width
Why two 213 µm choices? A micron opening alone does not fully describe woven mesh. JPP213-76 and JPP213-81 have the same clear aperture but different thread diameters and mesh counts, which changes the fabric geometry and can affect open area, handling and strength.
Reference Specification
200 Micron Nylon Filter Mesh — Nearest INCE filtration Standard Specifications
Use these exact references in quotations and drawings instead of relying on the rounded 200 µm buying term alone.
| Reference | Actual Opening | Difference from 200 µm | Mesh Count / cm | Mesh Count / inch | Thread Diameter | Reference Width |
|---|---|---|---|---|---|---|
| JPP213-76 | 213 µm | +13 µm | 30 | 76 | 120 µm | 127 cm |
| JPP213-81 | 213 µm | +13 µm | 32 | 81 | 100 µm | 127 cm |
| JPP178-91 | 178 µm | −22 µm | 36 | 91 | 100 µm | 127 cm |
Material family: INCE filtration nylon filter mesh is supplied within a PA6 / PA66 monofilament family. Confirm actual nylon grade, tolerance, chemical compatibility, temperature and current production availability with the quotation.
Avoid a Common Sourcing Error
200 Micron Nylon Mesh Is Not the Same as 200 Mesh
200 micron refers to an aperture target near 0.20 mm. 200 mesh refers to a thread/opening count per inch and does not mean a 200 µm aperture. The nearest INCE filtration 200 µm target constructions are listed at 76 or 81 mesh/inch because thread diameter is part of the woven geometry.
200 µm
Nominal Opening Target
A purchasing target for the clear aperture, not a product code or thread count.
213 µm
Nearest Standard Opening
Available as two listed JPP constructions with different thread diameters.
200 mesh
Different Measurement
Mesh count cannot define the aperture without the thread diameter and weave geometry.
Nearby Exact Openings
150, 178, 213 and 237 Micron Nylon Mesh Compared
These exact listed constructions show where the nominal 200 µm target sits within the INCE filtration nylon mesh range.
150 µm
JPP150-10240 mesh/cm · 102 mesh/inch · 100 µm thread.
178 µm
JPP178-9136 mesh/cm · 91 mesh/inch · 100 µm thread.
213 µm
JPP213-76 / 81Two constructions at the nearest listed opening to 200 µm.
237 µm
JPP237-7128 mesh/cm · 71 mesh/inch · 120 µm thread.
Supply & Fabrication
200 Micron Nylon Mesh from Roll Goods to Finished Parts
After selecting JPP213-76, JPP213-81 or another parent mesh, define the final supply form and dimensions separately.
01Mesh RollsRoll goods for converters, OEMs and in-house fabrication.
02Cut PiecesSquare, rectangular or drawing-based cut profiles.
03Mesh DiscsRound discs, rings and center-hole parts.
04Tubes & ScreensFabricated mesh forms for compatible assemblies.
05OEM ComponentsDrawing-based parts from a confirmed parent mesh.
Typical Uses
Where a Nominal 200 Micron Nylon Filter Mesh May Be Used
Final suitability depends on the chosen construction, chemistry, temperature, cleaning method, mechanical loading and finished component design.
Coarse screening and equipment protection in compatible liquid systems.
Removal of larger agglomerates and debris before downstream stages.
Ingredient or process screening after material and compliance requirements are confirmed.
Surface screening where nylon is compatible with the complete chemical environment.
Upstream screens for larger particles that can interfere with equipment.
Discs, screens, inserts and custom mesh parts for equipment integration.
Cleanable mesh components for suitable service and cleaning conditions.
High-flow coarse screening before finer filtration stages.
Quotation Checklist
How to Order 200 Micron Nylon Filter Mesh Without Ambiguity
Start with the nominal target, then lock the order to an exact JPP construction and final fabricated shape.
Provide the approximately 200 µm opening target and the acceptable particle-screening range.
Compare JPP213-76 and JPP213-81 by thread diameter, mesh count and mechanical needs.
Provide roll length, cut dimensions, disc OD/ID, drawing, process liquid, temperature and quantity.
Related Pages
Continue from the 200 Micron Buying Target
Raw mesh vs finished bag: this page covers raw or fabricated woven nylon mesh around a nominal 200 µm target. The 200 Micron NMO Filter Bag page covers a finished bag element with a stated 200 µm bag rating and housing-compatible dimensions.
200 Micron Nylon Mesh FAQ
Frequently Asked Questions
Does INCE filtration have an exact 200 micron nylon mesh?
The current reference table does not list an exact 200 µm woven opening. The nearest listed opening is 213 µm, available as JPP213-76 and JPP213-81.
What is the difference between JPP213-76 and JPP213-81?
Both use a 213 µm opening and 127 cm reference width. JPP213-76 uses 30 mesh/cm, 76 mesh/inch and 120 µm thread; JPP213-81 uses 32 mesh/cm, 81 mesh/inch and 100 µm thread.
What is the finer nearby option?
JPP178-91 provides a 178 µm clear opening with 36 mesh/cm, 91 mesh/inch and 100 µm thread.
Is 200 micron nylon mesh the same as 200 mesh?
No. Micron is the clear opening; mesh is a thread/opening count. Always confirm the actual aperture and thread diameter.
Can 200 micron nylon mesh be supplied as filter discs?
Yes. After selecting the parent mesh, provide disc outside diameter, center-hole size, layer count, edge treatment and quantity.
What is the difference between 200 micron mesh and a 200 micron NMO filter bag?
The mesh page covers raw woven media and fabricated mesh parts. The NMO bag page covers a finished liquid filter bag with defined dimensions and top structures.
Need Nylon Mesh Around a 200 Micron Target?
Send the required opening, process conditions and finished dimensions. INCE filtration can compare the two 213 µm standard constructions and nearby options for quotation.
WhatsApp