96 µm
JPP96-163Closest Listed Opening
Only 4 µm below the nominal 100 µm target and the primary standard reference to review first.
64 mesh/cm163 mesh/inch60 µm thread127 cm width
Nominal 100 Micron Nylon Mesh
100 Micron Nylon Filter Mesh 96 µm JPP96-163 Closest Standard
“100 micron nylon filter mesh” is a common sourcing term, but the current INCE filtration reference table does not list an exact 100 µm woven opening. The closest listed construction is 96 µm JPP96-163, with 89 µm and 119 µm options available when a finer or coarser opening is acceptable.
Closest listed opening: 96 µmJPP96-163 · 64 mesh/cm · 163 mesh/inch · 60 µm thread
Quick answer: for a nominal 100 µm requirement, JPP96-163 is the closest listed INCE filtration construction. It has a 96 µm clear opening, 64 mesh/cm, 163 mesh/inch, 60 µm monofilament thread and 127 cm reference width. If 96 µm is not acceptable, compare the nearby 89 µm and 119 µm standard constructions before ordering.
Nearest Standard Constructions
Which Nylon Mesh Should You Use for a 100 Micron Target?
Use the nominal 100 µm target to start the inquiry, then select the actual woven construction by clear opening, mesh count, thread diameter and process needs.
89 µm
JPP89-183Finer Nearby Option
11 µm below the target, with a smaller opening and different thread geometry.
72 mesh/cm183 mesh/inch50 µm thread127 cm width
119 µm
JPP119-142Coarser Nearby Option
19 µm above the target and suitable for review where a larger aperture is acceptable.
56 mesh/cm142 mesh/inch60 µm thread127 cm width
Important: do not place an order using “100 micron” alone if the actual woven construction matters. Quote and purchase against the confirmed JPP reference and opening.
Reference Specification
100 Micron Nylon Filter Mesh — Closest INCE filtration Standard Specifications
The table shows the closest standard woven constructions around a nominal 100 µm buying target.
| Reference | Actual Opening | Difference from 100 µm | Mesh Count / cm | Mesh Count / inch | Thread Diameter | Reference Width |
|---|---|---|---|---|---|---|
| JPP96-163 | 96 µm | −4 µm | 64 | 163 | 60 µm | 127 cm |
| JPP89-183 | 89 µm | −11 µm | 72 | 183 | 50 µm | 127 cm |
| JPP119-142 | 119 µm | +19 µm | 56 | 142 | 60 µm | 127 cm |
Material family: INCE filtration nylon filter mesh is supplied within a PA6 / PA66 monofilament family. Confirm actual grade, tolerance, compatibility and production availability with the quotation.
Avoid a Common Sourcing Error
100 Micron Nylon Mesh Is Not the Same as 100 Mesh
100 micron refers to an aperture target near 100 µm. 100 mesh refers to thread/opening count per inch and does not define the same opening. The closest INCE filtration construction to 100 µm, JPP96-163, is listed at 163 mesh/inch.
100 µm
Nominal Opening Target
The common buying phrase describes the desired clear aperture, not a mesh count.
96 µm
Actual Standard Opening
JPP96-163 is the closest listed construction and should be identified by its actual reference in the quotation.
100 mesh
Different Measurement
Mesh count alone cannot be converted reliably without the thread diameter and full woven geometry.
Nearby Exact Openings
89, 96, 119 and 128 Micron Nylon Mesh Compared
These neighboring exact constructions show where a nominal 100 µm target sits within the current INCE filtration table.
89 µm
JPP89-18372 mesh/cm · 183 mesh/inch · 50 µm thread.
96 µm
JPP96-16364 mesh/cm · 163 mesh/inch · 60 µm thread. Closest listed opening.
119 µm
JPP119-14256 mesh/cm · 142 mesh/inch · 60 µm thread.
128 µm
JPP128-12248 mesh/cm · 122 mesh/inch · 80 µm thread.
Supply & Fabrication
100 Micron Nylon Mesh from Roll Goods to Finished Parts
Once the actual parent mesh is selected, define the final dimensions and fabrication form separately.
01Mesh RollsRoll goods for conversion or in-house fabrication.
02Cut PiecesSquare, rectangular or drawing-based profiles.
03Mesh DiscsRound discs, rings and center-hole parts.
04Tubes & ScreensFabricated forms where the selected mesh is suitable.
05OEM ComponentsDrawing-based parts from a confirmed parent mesh.
Typical Uses
Where a Nominal 100 Micron Nylon Filter Mesh May Be Used
Final suitability depends on the actual selected opening, nylon grade, chemistry, temperature, cleaning method and finished part design.
Defined-opening screening and equipment protection in compatible systems.
Particle screening before downstream equipment or filling stages.
Process screening only after material and compliance requirements are confirmed.
Surface screening after checking chemistry, concentration and temperature.
Mesh inserts upstream of components that require controlled particle screening.
Discs, screens and custom mesh parts integrated into equipment.
Applications where the selected nylon construction can be cleaned without damage.
Coarse-to-medium screening upstream of finer downstream filtration.
Quotation Checklist
How to Order 100 Micron Nylon Filter Mesh Without Ambiguity
Use the nominal target for the inquiry, then lock the order to an actual listed construction.
Tell us the process calls for approximately 100 µm clear opening and the acceptable retention range.
Review JPP96-163 first, then compare 89 or 119 µm if the process requires a different opening.
Provide roll length, cut dimensions, disc OD/ID, drawing, process liquid, temperature and quantity.
Related Pages
Continue from the 100 Micron Buying Target
Mesh media vs filter bag: this page covers raw or fabricated woven nylon mesh media around a nominal 100 µm target. The 100 Micron NMO Filter Bag page covers a finished bag element with defined bag dimensions and ring-top configurations.
100 Micron Nylon Mesh FAQ
Frequently Asked Questions
Does INCE filtration have an exact 100 micron nylon mesh?
The current reference table does not list an exact 100 µm woven opening. The closest listed construction is 96 µm JPP96-163.
What are the nearest alternatives to 100 micron?
JPP89-183 provides an 89 µm opening and JPP119-142 provides a 119 µm opening. The choice depends on the actual retention, flow and mechanical requirements.
Is 100 micron nylon mesh the same as 100 mesh?
No. Micron is the clear opening; mesh is a thread/opening count. JPP96-163 is close to 100 µm but is listed at 163 mesh/inch.
Can 100 micron nylon mesh be supplied as filter discs?
Yes. After selecting the parent mesh, provide disc outside diameter, center-hole size if any, layer count, edge treatment and quantity.
Is 100 micron nylon mesh food grade?
Mesh size alone does not establish food-contact suitability. Confirm the supplied nylon grade, documentation, operating temperature, cleaning chemistry and finished component requirements.
What is the difference between 100 micron nylon mesh and a 100 micron NMO filter bag?
The mesh page covers woven nylon media and fabricated mesh parts. The NMO filter bag page covers a finished liquid filter bag designed for a compatible filter housing.
Need Nylon Mesh Around a 100 Micron Target?
Send the required opening, process conditions and finished dimensions. INCE filtration can review JPP96-163 and neighboring standard constructions and confirm what to quote.
WhatsApp