250 Micron Grade
Suitable for customers specifically sourcing 250 µm nylon liquid filter bags for process filtration and particle screening.
250 µm Nylon Monofilament Mesh Filtration
250 Micron Nylon Filter Bags – NMO Mesh Liquid Filter Bags
INCE filtration 250 micron nylon filter bags are reusable nylon monofilament mesh filter bags designed for coarse particle removal, high-flow pre-filtration and industrial liquid filtration. The defined 250 µm opening supports screening of process solids and debris while maintaining low restriction. Standard 7 × 16 inch, 7 × 32 inch and compact sizes are available across 12 verified model codes, with plastic or stainless-steel ring-top configurations for compatible housings.
250 µmDefined mesh opening
12 ModelsReal product codes
5 SizesIndustrial bag dimensions
NMO MeshSurface Filtration12 Models
250 µm NMO Filter Bag Family
Representative nylon monofilament filter bag image. Final bag size and ring-top configuration depend on the selected SKU.
Quick Answer
What Is a 250 Micron Nylon Mesh Filter Bag?
A 250 micron nylon mesh filter bag is a surface-filtration bag made from nylon monofilament (NMO) mesh with a 250 µm opening. INCE filtration supplies 12 stitching-sewn configurations across five bag sizes, with plastic or stainless-steel ring-top options depending on the SKU. It is mainly used for coarse solids screening, high-flow pre-filtration and protection of downstream equipment.
MediaNylon monofilament mesh (NMO)
Opening250 µm defined mesh opening
Models12 verified product codes
Sizes5 industrial bag dimensions
Product Overview
250 Micron NMO Filter Bag Construction and Selection
This product family uses nylon monofilament mesh (NMO) as a surface-filtration medium with a defined 250 µm opening. Unlike needle felt, which captures particles through a three-dimensional fiber depth, monofilament mesh primarily screens particles at the media surface. For all verified 250 µm media options, see the 250 Micron Filter Bags overview.
The 250 µm NMO range is available in five actual sizes. Depending on bag size, buyers can select plastic eversion, plastic varus, plastic up-ring or stainless-steel ring tops. The correct configuration should be matched to the filter housing, liquid chemistry and operating conditions.
250 µm Filtration
Designed for applications that need a 250 micron nylon filtration grade for high-flow coarse solids screening, debris removal and pre-filtration.
Real Product Codes
Each configuration has a clear code based on size and top structure.
Five Actual Sizes
Available from compact 105×230 mm bags to larger 180×810 mm models.
Multiple Top Structures
Choose plastic or stainless steel top configurations according to the housing.
Product Configuration
Built Around Real Sizes and Real Model Codes
This page is structured around the actual INCE filtration 250 µm nylon liquid filter bag range. It does not use generic sizes or unsupported top styles. Each size is connected to the specific top configurations that are actually available.
12 ModelsDefined product codes
5 Sizesmm and inch dimensions
4 Top TypesDepending on bag size
1 Body TypeStitching sewn
Product Advantages
Why Choose INCE filtration 250 Micron Nylon Liquid Filter Bags?
Clear product coding, multiple real dimensions and flexible top configurations make selection easier for industrial filtration buyers and OEM projects.
Five Real Bag Sizes
Dimensions include 180×410, 180×810, 105×230, 105×380 and 150×560 mm.
Multiple Plastic Ring Tops
Available options include eversion, varus and up-ring structures depending on size.
Stainless Steel Ring Options
Selected sizes are available with stainless steel ring tops for compatible housings.
Clear Product Codes
Each model code identifies the opening, size and top configuration.
Factory Supply
INCE filtration supports B2B purchasing, repeat orders and project-based filtration supply.
Available Dimensions
250 Micron Nylon Filter Bags by Size
The product range includes five actual dimensions. Available top structures vary by size.
180 × 410 mm7 × 16 inch
3 Top Options
- Plastic eversion ring top
- Plastic varus ring top
- Stainless steel ring top
180 × 810 mm7 × 32 inch
3 Top Options
- Plastic eversion ring top
- Plastic varus ring top
- Stainless steel ring top
105 × 230 mm4 × 9 inch
2 Top Options
- Plastic eversion ring top
- Stainless steel ring top
105 × 380 mm4 × 15 inch
2 Top Options
- Plastic eversion ring top
- Stainless steel ring top
150 × 560 mm6 × 22 inch
2 Top Options
- Plastic up ring top
- Stainless steel ring top
Bag Top Structures
Available Top Types
Top availability depends on bag size. Use the model table below to match the exact size and top configuration.
Plastic Eversion Ring Top
Available on 180×410 mm, 180×810 mm, 105×230 mm and 105×380 mm models.
Plastic Varus Ring Top
Available on 180×410 mm and 180×810 mm models.
Plastic Up Ring Top
Available on the 150×560 mm / 6×22 inch model.
Stainless Steel Ring Top
Available across all five sizes in the listed product range.
Complete Product Range
250 Micron Nylon Liquid Filter Bag Product Codes
All models below use nylon material, 250 µm opening and stitching-sewn bag body construction.
| Material | Product Code | Size (mm) | Size (inch) | Opening | Bag Body Type | Bag Top Type |
|---|---|---|---|---|---|---|
| Nylon | NMO-250um-180*410-FS | 180 × 410 mm | 7 × 16 inch | 250 µm | Stitching sewn | Plastic eversion ring top |
| Nylon | NMO-250um-180*410-GS | 180 × 410 mm | 7 × 16 inch | 250 µm | Stitching sewn | Plastic varus ring top |
| Nylon | NMO-250um-180*410-SS | 180 × 410 mm | 7 × 16 inch | 250 µm | Stitching sewn | Stainless steel ring top |
| Nylon | NMO-250um-180*810-FS | 180 × 810 mm | 7 × 32 inch | 250 µm | Stitching sewn | Plastic eversion ring top |
| Nylon | NMO-250um-180*810-GS | 180 × 810 mm | 7 × 32 inch | 250 µm | Stitching sewn | Plastic varus ring top |
| Nylon | NMO-250um-180*810-SS | 180 × 810 mm | 7 × 32 inch | 250 µm | Stitching sewn | Stainless steel ring top |
| Nylon | NMO-250um-105*230-FS | 105 × 230 mm | 4 × 9 inch | 250 µm | Stitching sewn | Plastic eversion ring top |
| Nylon | NMO-250um-105*230-SS | 105 × 230 mm | 4 × 9 inch | 250 µm | Stitching sewn | Stainless steel ring top |
| Nylon | NMO-250um-105*380-FS | 105 × 380 mm | 4 × 15 inch | 250 µm | Stitching sewn | Plastic eversion ring top |
| Nylon | NMO-250um-105*380-SS | 105 × 380 mm | 4 × 15 inch | 250 µm | Stitching sewn | Stainless steel ring top |
| Nylon | NMO-250um-150*560-XS | 150 × 560 mm | 6 × 22 inch | 250 µm | Stitching sewn | Plastic up ring top |
| Nylon | NMO-250um-150*560-SS | 150 × 560 mm | 6 × 22 inch | 250 µm | Stitching sewn | Stainless steel ring top |
Verified Technical Data
250 Micron Nylon Mesh Filter Bag Technical Specification
The values below are limited to data confirmed by the current INCE filtration product range. Parameters such as thread diameter, open area and a universal temperature limit are intentionally not stated without media-specific verification.
| Parameter | Verified Specification | Selection Note |
|---|---|---|
| Filter Media | Nylon monofilament mesh (NMO) | Surface-filtration media with defined mesh openings. |
| Opening Rating | 250 µm | Used for coarse particle screening and high-flow pre-filtration. |
| Filtration Mechanism | Surface filtration | Particles are retained mainly at the mesh surface rather than through a felt depth structure. |
| Bag Body Construction | Stitching sewn | Confirmed across the 12 listed model codes. |
| Available Sizes | 180×410, 180×810, 105×230, 105×380, 150×560 mm | Five actual product dimensions. |
| Ring-Top Codes | FS, GS, XS, SS | Availability depends on bag size; see the complete SKU table. |
| Model Count | 12 SKUs | Each model identifies micron grade, size and ring-top configuration. |
| Typical Filtration Role | Coarse screening, pre-filtration, equipment protection | Final suitability depends on solids loading, particle shape and required outlet quality. |
| Reuse / Cleaning | Suitable for selected reusable applications | Reuse depends on contaminant type, cleaning method, hygiene requirement and bag condition. |
| Chemical & Temperature Selection | Confirm before use | Verify exact nylon media, liquid chemistry, ring or seal material and operating conditions rather than assuming a universal limit from micron rating alone. |
Why some numbers are not listed: thread diameter, open area and maximum operating temperature can vary with the exact nylon mesh construction and should be confirmed from the supplied media specification before engineering approval.
Micron Comparison
200 vs 250 vs 300 vs 400 Micron Nylon Filter Bags
Use this comparison as a practical selection guide. A lower micron number is finer; a higher micron number is coarser. Final selection should match the smallest particles that must be controlled without creating unnecessary restriction.
| Micron Rating | Relative Screening | Typical Selection Logic | Product Page |
|---|---|---|---|
| 200 µm | Finer than 250 µm | Choose when smaller coarse particles must be controlled and the extra fineness is justified. | 200 Micron Nylon Bags → |
| 250 µm | Middle coarse-screening option | Useful when the process needs high-flow coarse solids screening with a defined 250 µm mesh opening. | Current product |
| 300 µm | Coarser than 250 µm | Choose when larger debris is the main concern and finer 250 µm screening is unnecessary. | 300 Micron Nylon Bags → |
| 400 µm | Much coarser than 250 µm | Choose for very coarse screening when only larger particles or process debris need to be removed. | 400 Micron Nylon Bags → |
What does a 250 micron nylon filter bag remove?
A 250 µm NMO bag is intended for coarse screening and primarily retains particles larger than its defined mesh opening. Actual retention can change with particle shape, deformability, solids loading and flow conditions, so the micron opening should be treated as part of the full process specification rather than a stand-alone efficiency guarantee.
Industrial Applications
Where 250 Micron Nylon Mesh Filter Bags Can Be Used
Application suitability depends on the liquid, temperature, chemistry, pressure and filtration system.
01
Water Treatment
High-flow screening of larger suspended particles, debris, fibers and process solids in compatible water-processing and pre-filtration systems.
02
Paints & Coatings
Removal of process contaminants before downstream processing or filling.
03
Industrial Chemicals
Coarse solids removal where nylon is compatible with the process liquid.
04
Process Liquids
Filtration for compatible manufacturing and production liquids.
05
Food Processing
Selected liquid-filtration stages subject to process and material compatibility.
06
Electronics
Filtration for selected process liquids in controlled manufacturing environments.
07
General Manufacturing
Protection of pumps, nozzles and downstream equipment from coarse particles, fibers and process debris.
08
OEM Filtration Systems
Model-specific configurations for compatible housings and equipment projects.
Why INCE filtration
Your 250 Micron Nylon Mesh Filter Bag Manufacturer
We support distributors, filtration equipment companies and industrial buyers with defined model codes and multiple housing-compatible configurations.
01
12 Defined Models
Clear codes reduce ambiguity during purchasing and repeat orders.
02
Five Real Sizes
Selection is based on actual dimensions rather than generic placeholders.
03
Multiple Ring Tops
Plastic and stainless steel options are available according to bag size.
04
B2B Supply Support
Suitable for repeat purchasing, distributors and industrial filtration projects.
Frequently Asked Questions
250 Micron Nylon Mesh Filter Bag FAQ
What is a 250 micron nylon mesh filter bag?
It is a surface-filtration bag made from nylon monofilament mesh with a 250 µm opening. INCE filtration supplies 12 stitching-sewn configurations across five bag sizes.
What does NMO mean in an INCE filtration filter bag code?
NMO identifies the nylon monofilament mesh media family used for these surface-filtration bags.
What does a 250 micron nylon filter bag remove?
It is used for coarse screening and pre-filtration and primarily retains particles larger than the defined mesh opening. Actual retention also depends on particle shape, deformability, solids loading and process conditions.
Is nylon mesh surface filtration or depth filtration?
Nylon monofilament mesh is primarily a surface-filtration medium with defined openings, unlike needle felt depth media.
Can a 250 micron nylon mesh filter bag be cleaned and reused?
Nylon monofilament mesh can be suitable for selected reusable applications. Reuse depends on the contaminant, cleaning method, hygiene requirements and condition of the bag.
What sizes are available for 250 micron nylon filter bags?
Available sizes are 180×410 mm, 180×810 mm, 105×230 mm, 105×380 mm and 150×560 mm.
Which ring-top styles are available?
Depending on size, the range includes plastic eversion, plastic varus, plastic up-ring and stainless steel ring tops.
What is the difference between 200, 250 and 300 micron nylon filter bags?
A 200 µm mesh is finer, 250 µm provides a middle coarse-screening option, and 300 µm is coarser. Selection depends on the smallest particles that must be controlled and the required flow and solids loading.
What temperature and chemicals are compatible with a 250 micron nylon filter bag?
Do not select a universal temperature or chemical limit from micron rating alone. Confirm the exact nylon media, liquid chemistry, seal or ring material and operating conditions before use.
Can I order by exact product code?
Yes. The 12 listed model codes identify the 250 µm nylon grade, bag size and ring-top configuration.
What is the difference between a 250 micron nylon mesh bag and a felt filter bag?
A nylon monofilament mesh bag uses defined openings for surface filtration and is often selected for reusable coarse screening. A felt filter bag uses a three-dimensional fiber structure for depth filtration and is typically selected when finer or higher solids-loading capture is required.
Can INCE filtration manufacture custom 250 micron nylon filter bags?
Yes. INCE filtration supports OEM supply for compatible custom sizes and configurations. Send the required dimensions, ring-top style, liquid, operating conditions and quantity for technical confirmation before quotation.
Request a Quote
Need 250 Micron Nylon Mesh Filter Bags?
Send INCE filtration the required product code, bag size, ring-top type, liquid and quantity. We can help match the correct NMO 250 µm configuration to your filtration housing and operating conditions.
Inquiry Form
Request a Nylon Mesh Filter Bag Quote
Send the model, bag size, ring-top style and quantity. The current product page and URL are included automatically with your inquiry.
- Product Family: Nylon mesh liquid filter bags
- Media: Nylon monofilament mesh (NMO)
- Selection: Micron opening, size and ring top
- Custom Supply: OEM sizes and configurations
- Response: Technical confirmation and quotation
WhatsApp