Selection priority
Review the equipment supplier's maximum permitted particle size and the pressure differential across the supported screen.
Incefiltration · PET Monofilament Mesh
200 Micron Polyester Filter Mesh
A 0.20 mm opening target for supported screens
Use a 200 micron polyester mesh specification when the process calls for a 0.2 mm clear opening. Define the mesh support, usable screen area and edge sealing together with the fabric construction.
View SpecificationsRequest a Quote
200 µmOpening target
0.2 mmMetric equivalent
PETPolyester material
MonofilamentWoven construction
Rolls & partsSupply formats
What Is 200 Micron Polyester Filter Mesh?
200 micron polyester filter mesh is woven PET monofilament fabric specified by a target clear opening of 200 µm (0.2 mm). Incefiltration supplies polyester mesh in rolls and reviews cut pieces, discs and OEM components by specification. This is a raw woven mesh selection, not a finished filter-bag rating.
Nearest size comparison
Compare 150 and 250 µm against the actual particle-size distribution. Moving to a larger opening may allow additional particles to pass.
What your quote must confirm
Actual clear opening and tolerance, PET grade, thread diameter, mesh count, usable dimensions and finished-part requirements. A micron target alone does not identify a complete production specification.
Range reference: Incefiltration polyester mesh specification guide. For application-specific confirmation, send your sample or drawing to Incefiltration.
200 Micron PET Mesh Specifications
Use this specification checklist to request 200 micron polyester mesh fabric. The final woven construction and availability are confirmed during quotation.
| Parameter | Requirement / confirmation |
|---|---|
| Target clear opening | 200 µm / 0.2 mm; state your acceptable tolerance |
| Material | Polyester (PET) monofilament; exact grade to be confirmed |
| Mesh count | Confirm count per inch or centimetre for the offered weave |
| Thread diameter / open area | Confirm against the selected production specification |
| Roll or part dimensions | Specify usable width and length, or drawing dimensions and tolerances |
| Supply format | Rolls, cut pieces, discs, rings, tubes or OEM screens for review |
| Operating conditions | Liquid chemistry, temperature, viscosity, flow, pressure differential and cleaning |
| Inspection / documentation | Agree aperture inspection, sample approval and application-specific documentation |
Opening is not an absolute filtration rating. Woven aperture describes geometry. Retention depends on particle shape, deformation, tolerances and sealing. Define efficiency and test conditions separately where required.
Selecting a 200 µm Opening
Compare 150 and 250 µm against the actual particle-size distribution. Moving to a larger opening may allow additional particles to pass.
150 Micron Polyester Mesh
0.15 mm target. 50 µm smaller than the 200 µm target. Finer opening target than this page.
Explore 150 µm specifications →200 Micron Polyester Mesh
0.2 mm target. Current selection; confirm production tolerance.
250 Micron Polyester Mesh
0.25 mm target. 50 µm larger than the 200 µm target. Coarser opening target than this page.
Explore 250 µm specifications →Micron and mesh count are different. 200 micron is not 200 mesh. The thread diameter is needed to relate an aperture to a mesh count. Flow also depends on open area, viscosity, screen size and solids loading.
Polyester Mesh Rolls, Discs & Custom Parts
Rolls & cut pieces
Specify roll width, roll length or cut dimensions. Confirm usable width, cutting tolerance and packaging for conversion or assembly.
Discs & rings
Provide outside and inside diameters, dimensional tolerances and edge treatment. Check support and sealing in the installed part.
Explore filter mesh discs →Tubes & OEM screens
Submit drawings showing joints, frame contact, mounting and inspection criteria. Fabrication suitability is reviewed for the selected weave.
Custom mesh fabrication →Where to Evaluate 200 Micron Polyester Mesh
Equipment inlet screening
Review the equipment supplier's maximum permitted particle size and the pressure differential across the supported screen.
Compatible process liquids
Review PET compatibility with the full formulation, operating temperature and cleaning agents. Test for acceptable particle removal without unwanted retention of useful ingredients.
OEM filter components
Evaluate the assembled screen, including support, edge sealing and joints. For food-contact duties, request documentation for the exact material and intended conditions.
For a material comparison, visit Polyester Filter Mesh or review the Nylon Filter Mesh range.
Specify Your Mesh for an Accurate Quote
01 · Separation requirement
Send the 200 µm target, tolerance, particle information and any existing material sample or specification.
02 · Process and assembly
Provide chemistry, temperature, flow, viscosity, pressure differential, cleaning method and supporting structure.
03 · Supply and inspection
Include dimensions, quantity, drawing revision, edge finish, packaging and required documents. Agree sample acceptance before production.
200 Micron Polyester Filter Mesh FAQ
What does 200 micron polyester filter mesh mean?
It describes a 200 µm (0.2 mm) clear-opening target for woven polyester monofilament mesh. Confirm the offered production aperture and tolerance before ordering.
Is 200 micron the same as 200 mesh?
No. Micron measures opening size; mesh count describes the number of mesh periods per inch or centimetre. Thread diameter is also required to relate the two.
Is an exact 200 µm construction confirmed?
The polyester mesh range lists this size as a purchasing target. The quotation must confirm the actual aperture, mesh count, thread diameter, open area and available width.
Does this mesh provide absolute filtration?
The opening is a geometric specification, not a guaranteed retention efficiency. Particle shape, deformation, sealing and process conditions affect performance. Specify a test method and efficiency requirement if needed.
Can I order custom discs or cut pieces?
Incefiltration can review rolls, cut pieces, discs, rings, tubes and OEM screens. Send dimensions, tolerances, edge finish and quantity with the selected opening target.
What should I check for chemical or food-contact use?
Confirm the exact PET grade, liquid composition, temperature and cleaning conditions. Request documentation for the intended food-contact use and destination market when applicable.
What matters when using 200 micron mesh at an equipment inlet?
Review the equipment supplier's maximum permitted particle size and the pressure differential across the supported screen. Compare 150 and 250 µm against the actual particle-size distribution. Moving to a larger opening may allow additional particles to pass.
Explore Polyester Mesh by Micron Target
Request 200 Micron Polyester Filter Mesh
Send your aperture tolerance, dimensions, operating conditions and quantity. Incefiltration will review the mesh construction and supply format for your application.
Send Your Mesh Requirement
WhatsApp