Selection priority
Test irregular or elongated particles with the finished assembly; their passage cannot be predicted from one size dimension alone.
Incefiltration · PET Monofilament Mesh
150 Micron Polyester Filter Mesh
Intermediate screening for liquids and OEM parts
A 0.15 mm aperture target bridges the 100 and 200 µm selections. It is a practical starting point for drawing-based screens where particle separation, support and fabrication all need to be specified.
View SpecificationsRequest a Quote
150 µmOpening target
0.15 mmMetric equivalent
PETPolyester material
MonofilamentWoven construction
Rolls & partsSupply formats
What Is 150 Micron Polyester Filter Mesh?
150 micron polyester filter mesh is woven PET monofilament fabric specified by a target clear opening of 150 µm (0.15 mm). Incefiltration supplies polyester mesh in rolls and reviews cut pieces, discs and OEM components by specification. This is a raw woven mesh selection, not a finished filter-bag rating.
Nearest size comparison
Compare 100 µm for a finer target and 200 µm for a coarser target. Confirm the acceptable aperture range before approving either alternative.
What your quote must confirm
Actual clear opening and tolerance, PET grade, thread diameter, mesh count, usable dimensions and finished-part requirements. A micron target alone does not identify a complete production specification.
Range reference: Incefiltration polyester mesh specification guide. For application-specific confirmation, send your sample or drawing to Incefiltration.
150 Micron PET Mesh Specifications
Use this specification checklist to request 150 micron polyester mesh fabric. The final woven construction and availability are confirmed during quotation.
| Parameter | Requirement / confirmation |
|---|---|
| Target clear opening | 150 µm / 0.15 mm; state your acceptable tolerance |
| Material | Polyester (PET) monofilament; exact grade to be confirmed |
| Mesh count | Confirm count per inch or centimetre for the offered weave |
| Thread diameter / open area | Confirm against the selected production specification |
| Roll or part dimensions | Specify usable width and length, or drawing dimensions and tolerances |
| Supply format | Rolls, cut pieces, discs, rings, tubes or OEM screens for review |
| Operating conditions | Liquid chemistry, temperature, viscosity, flow, pressure differential and cleaning |
| Inspection / documentation | Agree aperture inspection, sample approval and application-specific documentation |
Opening is not an absolute filtration rating. Woven aperture describes geometry. Retention depends on particle shape, deformation, tolerances and sealing. Define efficiency and test conditions separately where required.
Selecting a 150 µm Opening
Compare 100 µm for a finer target and 200 µm for a coarser target. Confirm the acceptable aperture range before approving either alternative.
100 Micron Polyester Mesh
0.1 mm target. 50 µm smaller than the 150 µm target. Finer opening target than this page.
Explore 100 µm specifications →150 Micron Polyester Mesh
0.15 mm target. Current selection; confirm production tolerance.
200 Micron Polyester Mesh
0.2 mm target. 50 µm larger than the 150 µm target. Coarser opening target than this page.
Explore 200 µm specifications →Micron and mesh count are different. 150 micron is not 150 mesh. The thread diameter is needed to relate an aperture to a mesh count. Flow also depends on open area, viscosity, screen size and solids loading.
Polyester Mesh Rolls, Discs & Custom Parts
Rolls & cut pieces
Specify roll width, roll length or cut dimensions. Confirm usable width, cutting tolerance and packaging for conversion or assembly.
Discs & rings
Provide outside and inside diameters, dimensional tolerances and edge treatment. Check support and sealing in the installed part.
Explore filter mesh discs →Tubes & OEM screens
Submit drawings showing joints, frame contact, mounting and inspection criteria. Fabrication suitability is reviewed for the selected weave.
Custom mesh fabrication →Where to Evaluate 150 Micron Polyester Mesh
Intermediate screening
Test irregular or elongated particles with the finished assembly; their passage cannot be predicted from one size dimension alone.
Compatible process liquids
Review PET compatibility with the full formulation, operating temperature and cleaning agents. Test for acceptable particle removal without unwanted retention of useful ingredients.
OEM filter components
Evaluate the assembled screen, including support, edge sealing and joints. For food-contact duties, request documentation for the exact material and intended conditions.
For a material comparison, visit Polyester Filter Mesh or review the Nylon Filter Mesh range.
Specify Your Mesh for an Accurate Quote
01 · Separation requirement
Send the 150 µm target, tolerance, particle information and any existing material sample or specification.
02 · Process and assembly
Provide chemistry, temperature, flow, viscosity, pressure differential, cleaning method and supporting structure.
03 · Supply and inspection
Include dimensions, quantity, drawing revision, edge finish, packaging and required documents. Agree sample acceptance before production.
150 Micron Polyester Filter Mesh FAQ
What does 150 micron polyester filter mesh mean?
It describes a 150 µm (0.15 mm) clear-opening target for woven polyester monofilament mesh. Confirm the offered production aperture and tolerance before ordering.
Is 150 micron the same as 150 mesh?
No. Micron measures opening size; mesh count describes the number of mesh periods per inch or centimetre. Thread diameter is also required to relate the two.
Is an exact 150 µm construction confirmed?
The polyester mesh range lists this size as a purchasing target. The quotation must confirm the actual aperture, mesh count, thread diameter, open area and available width.
Does this mesh provide absolute filtration?
The opening is a geometric specification, not a guaranteed retention efficiency. Particle shape, deformation, sealing and process conditions affect performance. Specify a test method and efficiency requirement if needed.
Can I order custom discs or cut pieces?
Incefiltration can review rolls, cut pieces, discs, rings, tubes and OEM screens. Send dimensions, tolerances, edge finish and quantity with the selected opening target.
What should I check for chemical or food-contact use?
Confirm the exact PET grade, liquid composition, temperature and cleaning conditions. Request documentation for the intended food-contact use and destination market when applicable.
Why does particle shape matter for a 150 micron screen?
Test irregular or elongated particles with the finished assembly; their passage cannot be predicted from one size dimension alone. Compare 100 µm for a finer target and 200 µm for a coarser target. Confirm the acceptable aperture range before approving either alternative.
Explore Polyester Mesh by Micron Target
Request 150 Micron Polyester Filter Mesh
Send your aperture tolerance, dimensions, operating conditions and quantity. Incefiltration will review the mesh construction and supply format for your application.
Send Your Mesh Requirement
WhatsApp