Selection priority
Check product loss as well as debris removal, particularly when useful solids and unwanted particles overlap in size.
Incefiltration · stainless steel Woven Wire Mesh
50 Micron Stainless Steel Filter Mesh
Fine filtration and controlled particle screening
A 0.05 mm target is a useful comparison point between the 25 and 100 µm options. Define which solids must be removed and which useful ingredients should pass before selecting the construction.
View SpecificationsRequest a Quote50 µmOpening target
0.05 mmMetric equivalent
304 / 316LAlloy selection
WeaveConfirm construction
Rolls & partsSupply formats
What Is 50 Micron Stainless Steel Filter Mesh?
50 micron stainless steel filter mesh is woven stainless steel wire cloth specified by a target clear opening of 50 µm (0.05 mm). Incefiltration supplies stainless steel mesh in rolls and reviews cut pieces, discs and OEM components by specification. This is a raw woven mesh selection, not a finished filter-bag rating.
Nearest size comparison
Compare 25 µm for a finer opening and 100 µm for a coarser one. These choices change separation; they are not interchangeable flow grades.
What your quote must confirm
Actual clear opening and tolerance, alloy grade, wire diameter, mesh count, usable dimensions and finished-part requirements. A micron target alone does not identify a complete production specification.
Range reference: Incefiltration stainless steel mesh specification guide. For application-specific confirmation, send your sample or drawing to Incefiltration.
50 Micron stainless steel Mesh Specifications
Use this specification checklist to request 50 micron stainless steel mesh fabric. The final woven construction and availability are confirmed during quotation.
| Parameter | Requirement / confirmation |
|---|---|
| Target clear opening | 50 µm / 0.05 mm; state your acceptable tolerance |
| Material | 304 or 316L stainless steel; exact alloy and weave to be confirmed |
| Weave / rating basis | Confirm plain or twill square-opening construction, or a separately verified Dutch-weave rating |
| Mesh count | Confirm count per inch or centimetre for the offered weave |
| Wire diameter / open area | Confirm against the selected production specification |
| Roll or part dimensions | Specify usable width and length, or drawing dimensions and tolerances |
| Supply format | Rolls, cut pieces, discs, rings, tubes or OEM screens for review |
| Operating conditions | Liquid chemistry, temperature, viscosity, flow, pressure differential and cleaning |
| Inspection / documentation | Agree aperture inspection, sample approval and application-specific documentation |
Opening is not an absolute filtration rating. Woven aperture describes geometry. Retention depends on particle shape, deformation, tolerances and sealing. Define efficiency and test conditions separately where required.
Selecting a 50 µm Opening
Compare 25 µm for a finer opening and 100 µm for a coarser one. These choices change separation; they are not interchangeable flow grades.
25 Micron Stainless Steel Mesh
0.025 mm target. 25 µm smaller than the 50 µm target. Finer opening target than this page.
Explore 25 µm specifications →50 Micron Stainless Steel Mesh
0.05 mm target. Current selection; confirm production tolerance.
100 Micron Stainless Steel Mesh
0.1 mm target. 50 µm larger than the 50 µm target. Coarser opening target than this page.
Explore 100 µm specifications →Micron and mesh count are different. 50 micron is not 50 mesh. The wire diameter is needed to relate an aperture to a mesh count. Flow also depends on open area, viscosity, screen size and solids loading.
304, 316L and Weave Selection
304 stainless steel
Review 304 for compatible industrial screening duties. The micron designation does not specify corrosion resistance, allowable temperature or mechanical strength.
316L stainless steel
Review 316L when the process requires a different corrosion-resistance profile. Confirm the full chemical environment and temperature; the alloy name alone does not guarantee suitability.
Plain, twill or Dutch weave
Specify square-opening mesh by its geometric aperture and wire diameter. For Dutch weave, request the manufacturer's verified filtration rating and test basis; do not treat the rating as an equivalent square opening.
Stainless Steel Mesh Rolls, Discs & Custom Parts
Rolls & cut pieces
Specify roll width, roll length or cut dimensions. Confirm usable width, cutting tolerance and packaging for conversion or assembly.
Discs & rings
Provide outside and inside diameters, dimensional tolerances and edge treatment. Check support and sealing in the installed part.
Explore filter mesh discs →Tubes & OEM screens
Submit drawings showing joints, frame contact, mounting and inspection criteria. Fabrication suitability is reviewed for the selected weave.
Custom mesh fabrication →Where to Evaluate 50 Micron Stainless Steel Mesh
Fine process screening
Check product loss as well as debris removal, particularly when useful solids and unwanted particles overlap in size.
Compatible process liquids
Review stainless steel compatibility with the full formulation, operating temperature and cleaning agents. Test for acceptable particle removal without unwanted retention of useful ingredients.
OEM filter components
Evaluate the assembled screen, including support, edge sealing and joints. For food-contact duties, request documentation for the exact material and intended conditions.
For a material comparison, visit Stainless Steel Filter Mesh or review the Nylon Filter Mesh range.
Specify Your Mesh for an Accurate Quote
01 · Separation requirement
Send the 50 µm target, tolerance, particle information and any existing material sample or specification.
02 · Process and assembly
Provide chemistry, temperature, flow, viscosity, pressure differential, cleaning method and supporting structure.
03 · Supply and inspection
Include dimensions, quantity, drawing revision, edge finish, packaging and required documents. Agree sample acceptance before production.
50 Micron Stainless Steel Filter Mesh FAQ
What does 50 micron stainless steel filter mesh mean?
It describes a 50 µm (0.05 mm) clear-opening target for woven stainless-steel woven wire mesh. Confirm the offered production aperture and tolerance before ordering.
Is 50 micron the same as 50 mesh?
No. Micron measures opening size; mesh count describes the number of mesh periods per inch or centimetre. Wire diameter is also required to relate the two.
Is an exact 50 µm construction confirmed?
The stainless steel mesh range lists this size as a purchasing target. The quotation must confirm the actual aperture, mesh count, wire diameter, open area and available width.
Does this mesh provide absolute filtration?
The opening is a geometric specification, not a guaranteed retention efficiency. Particle shape, deformation, sealing and process conditions affect performance. Specify a test method and efficiency requirement if needed.
Can I order custom discs or cut pieces?
Incefiltration can review rolls, cut pieces, discs, rings, tubes and OEM screens. Send dimensions, tolerances, edge finish and quantity with the selected opening target.
What should I check for chemical or food-contact use?
Confirm 304 or 316L against liquid chemistry, chloride exposure, temperature and cleaning conditions. Request documentation for the intended food-contact use and destination market when applicable.
How do I choose between 25, 50 and 100 micron stainless steel mesh?
Check product loss as well as debris removal, particularly when useful solids and unwanted particles overlap in size. Compare 25 µm for a finer opening and 100 µm for a coarser one. These choices change separation; they are not interchangeable flow grades.
Explore Stainless Steel Mesh by Micron Target
Request 50 Micron Stainless Steel Filter Mesh
Send your aperture tolerance, dimensions, operating conditions and quantity. Incefiltration will review the mesh construction and supply format for your application.
Send Your Mesh Requirement
WhatsApp